MTTM-HEA-4.2
The top tie-beam courses are measures designed to improve the interconnection between the walls and the interaction between the masonry and the roof structure, helping to counteract local out-of-plane forces, such as the overturning of corner walls and the horizontal deflection of the walls. Their positioning at the top of the building also creates a perimeter bracing effect in an area generally characterised by a reduced level of compression and, consequently, by lower cohesion within the masonry. The collar beam may be constructed from timber, using continuous elements suitably connected to one another and to the masonry, or from steel, using sections or plates connected to the walls and to the timber roof trusses, including by means of metal caps or brackets. Steel and timber solutions generally help to limit the increase in mass and stiffness. In all cases, the collar must be effectively connected to both the masonry and the roof elements, so that it can effectively transfer horizontal forces and contribute to the building’s unified behaviour.
The tie-beam simultaneously acts as a link between the top walls, connects to the roof, and distributes the concentrated loads transmitted by the roof truss elements. It also improves the transfer of horizontal forces caused by earthquakes, wind and any thrust components from the roof to the load-bearing walls in its own plane. Steel solutions are of particular interest due to their light weight, minimal intrusion and the possibility of creating predominantly dry-fit connections. Compared with reinforced concrete cornices, timber or steel solutions generally make it possible to limit discontinuities in stiffness and the increase in mass at the top of the building – aspects that are particularly important for the seismic behaviour of historic buildings.
The effectiveness of the intervention depends on the continuity of the kerb, the quality of the connections between the various sections, and the ability of the underlying masonry to transfer the applied forces. Where the masonry is degraded, inconsistent or consists of multiple faces with poor connections, preventive consolidation may be necessary. For metal solutions, durability aspects must also be taken into account, particularly in damp or corrosive environments, as well as any effects of stress concentration at the anchor points. The use of composite materials can reduce certain corrosion problems, but still requires a thorough assessment of compatibility, the continuity of the reinforcement and the connections.
Where the top course of masonry shows poor cohesion or deterioration, it may be advisable to combine the parapet with localised consolidation works, for example by means of mortar injections or localised repairs. Particular attention must be paid to the connection between the parapet and the roof structure, as the effectiveness of the intervention depends on the ability to effectively transfer the forces from the roof slopes and timber elements to the bracing system. In the case of roofs subject to thrust, the parapet should not automatically be regarded as a substitute for specific devices designed to counteract such thrusts; instead, it may be supplemented with tie rods, chains or other connection and restraint systems, depending on the overall behaviour of the roof and the masonry.
Applicability and impact
Efficacy
Applicability
Environmental sustainability
Reversibility
Impact
Durability
****
***
*****
**
****
*****
Cost and construction logistics
Monetary cost
Construction complexity
Availability (time)
Execution time
Maintenance costs
Regionality
Integrative interventions
Use restriction
***
***
***
***
****
****
***
***
Production process
Degree of innovation
Sustainability
***
****
Structural vulnerability: Roofs.
Ministero per i Beni e le Attività Culturali (2011). Direttiva del Presidente del Consiglio dei ministri 9 febbraio 2011. Valutazione e riduzione del rischio sismico del patrimonio culturale con riferimento alle Norme tecniche per le costruzioni.
Giuffrè, A. (a cura di) (1993). Sicurezza e conservazione dei centri storici. Il caso Ortigia. Codice di pratica per gli interventi antisismici nel centro storico. Laterza, Roma-Bari.
Doglioni, F., Mazzotti, P. (a cura di) (2007). Codice di pratica per gli interventi di miglioramento sismico nel restauro del patrimonio architettonico. Regione Marche, Ancona.
Roca, P., Cervera, M., Gariup, G., Pelà, L. (2010). Structural Analysis of Masonry Historical Constructions. Classical and Advanced Approaches. Archives of Computational Methods in Engineering, 17(3), 299–325
Caliendo, G., Canu, A., Cinieri, V., D’Andrea, M., Fersini, M., Meli, C., Orazi, D., Serpe, E., Zamperini, E. (2015). Catene metalliche negli edifici storici in muratura. Diffusione, tipi e usi in diverse aree italiane. Scienza e Beni Culturali, XXXI, 683–697.