MTTM_Sisma_4-1_Collegamento_capochiave_metallico

MTTM. Earthquake

4. Interventions aimed at reducing thrusts and excess deformability in the roofs
4.1 Connection with metal key cap

MTTM-HEA-4.1

Description

The use of metal tie-ins is a technique designed to improve the connection between the roof framing elements and the perimeter walls, thereby limiting relative movements. In particular, it prevents translational movement or loss of support during seismic activity. The work can be carried out using metal bars, pins or tie rods connected to the timber elements of the roof and anchored to the masonry via external tie-ins, generally consisting of plates or other metal components capable of distributing the forces over a sufficiently large area of the wall. The system allows the roof and the top section of the masonry to be integrated, promoting a more unified behaviour of the building structure and contributing to the stabilisation of the upper parts of the walls, which are particularly vulnerable to out-of-plane forces. This connection can prove particularly useful in historic buildings with timber roofs, where the preservation of the existing roof structure is often a priority. However, the design must carefully consider the geometry and condition of the masonry, the position of the anchors, the load-bearing capacity of the timber elements, and the distribution of stresses introduced by the lintel.

Advantages

This method is generally effective in counteracting relative movements between the roof structure and the masonry and in improving the connection between the various parts of the structural system. It is characterised by minimal invasiveness, a small increase in mass and good compatibility with the preservation of existing timber structures. The use of mechanically connected metal devices also allows for localised interventions that can be inspected and, in many cases, are partially reversible.

Disadvantages and limitations of applicability

The effectiveness of the system depends to a significant extent on the quality and condition of the masonry in the anchorage area. Masonry that is unstable, degraded or consists of multiple courses with poor bonding may not be able to properly absorb the forces transmitted by the keystone and may require preliminary consolidation work. Insufficient dimensioning or an inappropriate distribution of pressures may lead to localised crushing, cracking or detachment of the masonry. In buildings of historical interest, the visual impact of external metal elements and their compatibility with decorated surfaces or features of architectural merit must also be assessed.

Synergies, interactions and opportunities for complementary interventions

It may be advisable to combine the use of key-head connectors with the local reinforcement of the masonry affected by the anchoring, the improvement of connections between the timber framework elements and, where necessary, the strengthening of the connections between the roof and the top-most masonry. Where roofs are characterised by thrust, the key-head connection must be regarded as part of a wider system and not as a substitute for devices specifically designed to counteract horizontal thrusts. It may also be necessary to verify the capacity of the timber elements to transfer the anticipated loads to the anchors without causing local crushing, cracking or failure.

Assessment against the criteria

Applicability and impact

Efficacy
Applicability
Environmental sustainability
Reversibility
Impact
Durability

***
****
*****
***
***
****

Cost and construction logistics

Monetary cost
Construction complexity
Availability (time)
Execution time
Maintenance costs
Regionality
Integrative interventions
Use restriction

****
****
****
***
****
****
*****
****

Production process

Degree of innovation
Sustainability

***
****

Relationship with the indicators of the Risk Analysis Model

Structural vulnerability: Roofs

Riferimenti

Ministero per i Beni e le Attività Culturali (2011). Direttiva del Presidente del Consiglio dei ministri 9 febbraio 2011. Valutazione e riduzione del rischio sismico del patrimonio culturale con riferimento alle Norme tecniche per le costruzioni.

Giuffrè, A. (a cura di) (1993). Sicurezza e conservazione dei centri storici. Il caso Ortigia. Codice di pratica per gli interventi antisismici nel centro storico. Laterza, Roma-Bari.

Doglioni, F., Mazzotti, P. (a cura di) (2007). Codice di pratica per gli interventi di miglioramento sismico nel restauro del patrimonio architettonico. Regione Marche, Ancona.

Roca, P., Cervera, M., Gariup, G., Pelà, L. (2010). Structural Analysis of Masonry Historical Constructions. Classical and Advanced Approaches. Archives of Computational Methods in Engineering, 17(3), 299–325

Caliendo, G., Canu, A., Cinieri, V., D’Andrea, M., Fersini, M., Meli, C., Orazi, D., Serpe, E., Zamperini, E. (2015). Catene metalliche negli edifici storici in muratura. Diffusione, tipi e usi in diverse aree italiane. Scienza e Beni Culturali, XXXI, 683–697.