MTTM-HEA-2.4
The reinforced arch is a reinforcement technique designed to increase the load-bearing capacity of masonry arches by inserting tension-resistant elements—generally consisting of post-tensioned metal cables (“active tie rods”)—placed in contact with the masonry. The principle behind this method is to induce a state of compression in the masonry through the post-tensioning of the cables, thereby improving the structural behavior of the arch and reducing the likelihood of collapse mechanisms developing. The cables can be placed either on the extrados or the intrados of the arch. In the former case, their placement is generally easier when the extrados is free of infill materials, whereas in the presence of infill, partial removal of the infill may be necessary. Post-tensioning is achieved using appropriate anchoring systems and adjustment devices capable of applying the tensile force specified in the design. When properly designed, the reinforced arch results in a more favorable distribution of compressive stresses within the masonry, helping to keep the pressure curve within the load-bearing thickness of the arch and limiting the formation of collapse hinges. However, the intervention requires a careful assessment of the building’s overall structural condition and the capacity of the supporting elements to absorb the new stresses introduced.
The reinforced arch improves the arch’s static behavior by introducing a state of compression into the masonry, promoting a more uniform distribution of stresses and a more favorable pressure curve. This intervention helps limit the formation of collapse mechanisms and increases the structure’s load-bearing capacity without significantly altering its geometry, thereby preserving the original construction principle.
The effectiveness of a reinforced arch depends entirely on the structural condition of the entire building. In particular, the presence of insufficiently strong piers or the absence of effective systems to counteract thrusts—such as chains—can compromise the performance of the reinforcement, allowing kinematic movements to occur that involve the abutment sections of the arch. The application of post-tensioning also requires particularly careful design and monitoring of the applied stresses in order to avoid local stress concentrations or damage to the masonry.
Before beginning the work, it is advisable to verify the load-bearing capacity of the piers and supporting structures, planning—where necessary—work to reinforce the masonry or improve the foundations. In cases where there are no effective systems to counteract the thrusts, it may be necessary to reinforce the reinforced arch with metal chains or extend the tie rods down to the foundations, so that the applied forces can be properly absorbed by the entire structure. Any cracks present in the arch must also be repaired in advance using appropriate masonry reinforcement techniques.
Applicability and impact
Efficacy
Applicability
Environmental sustainability
Reversibility
Impact
Durability
****
****
*****
***
***
****
Cost and construction logistics
Monetary cost
Construction complexity
Availability (time)
Execution time
Maintenance costs
Regionality
Integrative interventions
Use restriction
****
***
****
***
****
****
***
***
Production process
Degree of innovation
Sustainability
***
****
Structural vulnerability: Arch and vault.
Doglioni, F., Moretti, A., & Petrini, V. (1994). Le chiese e il terremoto. LINT, Trieste.
Ministero della Cultura (2011). Linee guida per la valutazione e riduzione del rischio sismico del patrimonio culturale.
Ministero delle Infrastrutture e dei Trasporti (2018). Aggiornamento delle Norme Tecniche per le Costruzioni. D.M. 17 gennaio 2018.
Consiglio Superiore dei Lavori Pubblici (2019). Circolare n. 7 C.S.LL.PP.
ICOMOS (2003). Principles for the Analysis, Conservation and Structural Restoration of Architectural Heritage.
Lagomarsino, S., & Cattari, S. (2015). PERPETUATE Guidelines for Seismic Performance-Based Assessment of Cultural Heritage Masonry Structures.
Roca, P., Cervera, M., Gariup, G., & Pelà, L. (2010). Structural Analysis of Masonry Historical Constructions.
Tomaževič, M. (1999). Earthquake-Resistant Design of Masonry Buildings.
Valluzzi, M. R. (2007). Criteri e tecniche di consolidamento delle strutture murarie storiche.