MTTM_MIC2015_In_05_intonaco_termoisolante_esterno

Urban Heat Islands and Energy Efficiency in Historic Buildings.
MIC 2015 Guidelines

1. Internal and external insulation
In.05. External thermal insulating plaster

MTTM-UHI_MIC-05

Description

Replacing external plaster with thermally insulating plaster ensures a significant reduction in thermal bridges, even where decorative features or protruding plastered elements are present. The material consists of a premixed mortar based on lightweight aggregates, hydraulic binders and special additive resins that improve the thermal properties of traditional plaster.
When refurbishing listed buildings, the use of natural lime or the addition of M.3 expanded or fibrous insulation to the mix ensures that the building envelope’s breathability and permeability are similar to those of traditional masonry, without altering its hygroscopic behaviour.
The insulating capacity of thermal insulation plaster is lower than that of external thermal insulation composite systems (ETICS), both due to the higher thermal conductivity of the materials used and the reduced thicknesses; for this reason, it is advisable, where possible, to apply successive layers of plaster until a thickness of 4 to 6 centimetres is achieved, which ensures adequate insulation of the building

Advantages

Thermal insulation plaster can be applied where external thermal insulation composite systems are not compatible with the aesthetic and technical characteristics of the façades; furthermore, the plaster must cover the façades evenly.
As external thermal insulation plaster allows the masonry to act as a thermal mass, this solution is optimised for environments where the heating system operates continuously.
It represents an optimisation of traditional materials, whose protective function makes them perishable and generally requires them to be replaced periodically: for this reason, the work can be incorporated into routine façade maintenance activities.
The application techniques do not require any changes to current systems, provided that a uniform and continuous thickness of the render is ensured.
The use of natural lime and inorganic fibrous insulation materials as additives does not alter the hygrometric behaviour of the masonry, preventing the formation of interstitial condensation, damp patches or mould.
Finally, the ease of installation reduces the risk of thermal bridges resulting from poor workmanship during the insulation process.

Disadvantages and limitations of applicability

Thermal insulation plaster has a lower insulating capacity than other systems.

Synergies, interactions and opportunities for complementary interventions

Thermal insulation plaster offers an alternative to external thermal insulation composite systems (ETICS). To achieve better thermal insulation of the building, it should be combined with the replacement, upgrading or refurbishment of windows and doors (In,7-8) and the insulation of roofs (In,I -2-3 and the ground connection In.14-15, using either thermal insulation plaster or external wall insulation systems, provided that the insulating properties of the materials used do not differ too greatly, so as to avoid thermal bridges at the joints.

Assessment against the criteria

Applicability and impact

Efficacy
Applicability
Environmental sustainability
Reversibility
Impact
Quality of redevelopment
Durability

***
***
***
**
**
**
***

Cost and construction logistics

Monetary cost
Construction complexity
Availability (time)
Execution time
Maintenance costs
Regionality
Integrative interventions
Use restriction

***
**
***
***
**
***
**
***

Production process

Degree of innovation
Sustainability

***
****

Relationship with the indicators of the Risk Analysis Model

Formal vulnerability: Mitigations elements in the building – Roofs.
Structural and building services vulnerabilities: Building envelope and its efficiency.

Riferences

UNI EN ISO 13788:2003. Hygrometric performance of building components and elements. Italian National Standardisation Body. Milan.
UNI EN ISO 10211:2008. Thermal bridges in building construction. Italian National Standardisation Body. Milan.
Ministerial Decree of 26 January 2010. Amendment to the Decree of 11 March 2008 on the energy retrofitting of buildings